2026-11-15

Full-arch scan bodies: scanning edentulous implant cases with an intraoral scanner

Author: IMMT specialist team Published 3 min.

Full-arch scan bodies: scanning edentulous implant cases with an intraoral scanner

Full-arch implant cases can be scanned accurately with an intraoral scanner if dedicated edentulous scan bodies are placed on the multi-unit abutments: they give the scanner reference points where there are no teeth and reduce data drift between widely spaced implants. The AIDENT edentulous full-arch scan body kit is designed for exactly that – titanium scan bodies, scan caps and software data matching – and the result is an STL file for any CAD software.

Why edentulous arches are hard to scan

An edentulous arch has few distinct surface features and the implants are often far apart. Standard scan bodies are small, so the scanner struggles to stitch frames precisely, which can lead to layering and distortion. Edentulous scan bodies have a raised U-shaped section that bridges neighbouring implants and helps the scanner keep the geometry accurate.

Workflow in 4 steps

  1. Scan body placement. Screw the scan bodies onto the multi-unit abutments.
  2. Full-arch scanning. Focus the scan on the raised U-shaped section.
  3. Mount the scan caps. Place scan caps on the multi-unit abutments.
  4. Soft-tissue scan. Capture reference points and the gingiva.

The data is then imported into the software, matched and exported as an STL file that opens in any prosthetic CAD software to design the final or immediate provisional restoration, which can be 3D printed chairside.

Kit contents and properties

PropertyAIDENT edentulous jaw scanning kit
VersionsUF-A (M1.4 / M1.6 screws) and UF-B (M1.8 / M2.0 screws)
Scan bodiesSizes S, M and L, 4 of each
AccessoriesScrewdriver, retaining screws, scan caps (12 per screw size)
MaterialTC4 ELI titanium alloy, one-piece moulding
Manufacturing tolerance0.005 mm
Scanning error≤0.01 mm (with software matching)
Cap surfaceTitanium nitride coating
CompatibilityAny intraoral scanner; according to the manufacturer, over 95% of implant systems on the market

Compatible implant systems

The manufacturer's (partial) list includes multi-unit abutments from, among others: Nobel Biocare, Straumann, Osstem, MegaGen, Neodent, MIS, Dentium, Zimmer, Camlog, Alpha-Bio, Adin, Anthogyr, 3i, Neo Biotech, Dentis, ICX, Cortex, C-Tech, B&B Dental, Bioconcept, CLC Conic, Cybermed and WEGO. The screw size (M1.4, M1.6, M1.8 or M2.0) depends on the specific abutment – check with us which version you need before ordering.

Who this kit is for

  • Implantologists performing full-arch rehabilitations on 4–6 implants.
  • Practices that want to drop conventional impressions, poured models and verification jigs.
  • Teams delivering immediate provisionals printed in-house.

The kit works with any intraoral scanner, for example the AIDENT AI-30. The overall digital process is described in The digital workflow in the clinic.

Frequently asked questions

Will the kit work with my scanner?

Yes. The scan bodies work with any intraoral scanner, and the exported STL opens in any CAD software.

What is the difference between UF-A and UF-B?

The retaining screw size: UF-A uses M1.4 and M1.6, UF-B uses M1.8 and M2.0. Choose the version that matches your multi-unit abutment.

How much time does it save?

According to the manufacturer, the workflow from scan to final prosthesis is about 30% shorter because conventional impressions and models are no longer needed.

Are the scan bodies reusable?

They are made of titanium alloy. Clean and sterilise them according to the manufacturer's instructions.

How do I check compatibility with my implant system?

Send us the manufacturer and model of your multi-unit abutment and we will confirm compatibility and screw size.

Summary

Edentulous scan bodies let you complete full-arch implant cases fully digitally – accurately, faster and without conventional impressions. Current price and versions are on the product page; more about the manufacturer on the AIDENT page.